ASP5620 Series Single Stage/Entrifugal Chemicl Mixed Flow Pump
Home » Products » Product Classfication » Petrochemical Pump » ASP5620 Series Single Stage/Entrifugal Chemicl Mixed Flow Pump

loading

ASP5620 Series Single Stage/Entrifugal Chemicl Mixed Flow Pump

Performance Range
Capacity: Q ~7000m3/h
Head: H~25m
Work pressure:P ~1.OMpa
Work temperature:t-20~140℃
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Description


ASP5620 series single stage、centrifugal chemicl mixed flow pump includes horizontal radial section,cantilever type.


The pump is safe,steady operation and easy to maintenance.


The pump is steady in hydraulic performance,high efficiency.


The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.


Sealing can be packing seal,single、double mechanical seal according to different condition.


Rotation direction:The pump rotates clockwise from the drive end.



Application Area


The pump can transmit liquid that is neutral or corrosive with large flow rate,low head,even or has some particles.


Irrigation and drainage equipment


Cooling water circulation system


City coal gas project


Forced circulation in chemical processing


Salt making and alkali making industry



Performance Range


Capacity: Q ~7000m³/h


Head: H ~25m


Work pressure:P ~1.0Mpa


Work temperature:t -20~140℃



Structural Characteristics


• ASP series mixed flow pump is a “Pull-out”type pump.When examining and dismantling impeller and shaft seal,there is no need to disconnect the pipeline that is connected with the pump casing.Pump shaft is precision machined,and the bearing is thin oil lubrication.There is protective shaft sleeve in the stuffing box cover.The oil in the bearing box can be controlled by a constant oil cup.


• Supporting foot of pump can bear any load coming from pipeline,and pass it to the foundation.Then the rotor can not bend because of the load of bearing to make sure the max. service life of bearing.


• Passing area is so large that it can reduce the blocking.


• Pump with specification 35-40,its outlet&inlet flange dimension complies with HG20592 Standard,pressure rating is 1.0Mpa;for the pump with much larger specification,its pressure rating is 0.6MPa.


• Electric motor or internal combustion engine shall be used as the power drive.


• A whole air bleeder shall be installed on the pump,which shall be good for the exhaust of suction pipe.


• Sealing can be packing seal and double mechanical seal.



Model significance

20170508225218911891

Sectional Drawing

20170508225665566556


Previous: 
Next: 

RELATED PRODUCTS

Can't Find The Right Pump For Your Industries ?

Newsletter Subscribe

INFORMATION

    Phone: +86 -181 5656 5899
    Tel: +86 -181 5656 5899
   Email: frank@sanlianpump.com
   WhatsApp: +8618156565899
   Address:NO. 139, Tianwang Road, Nanxiang Town, Jiading District, Shanghai, China

QUICK LINKS

PRODUCT CATEGORIES

CONTACT US
Sanlian Pump Industry Co.,Ltd. Copyright © 2023 All Right Reserve Disclaimer ICP NO. :12020906